特定型号重置指南
Epson Photo 1290 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson Photo 1290 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why Epson Photo 1290 stops printing
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson Photo 1290, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect 旨在重置兼容的计数器 Epson Photo 1290. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson Photo 1290
请按顺序完成这些步骤。直接 USB 连接以及原始 Epson 驱动程序对于实现可靠通信至关重要。.
-
安装原始驱动程序
Install the official Epson driver for Photo 1290 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson Photo 1290 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson Photo 1290.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson Photo 1290 is not detected
- Install the original Epson driver for Photo 1290; a generic Windows driver may not expose the required communication interface.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
Epson Photo 1290 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
Does Epson Photo 1290 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.