特定型号重置指南
Epson Photo 1390 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson Photo 1390 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
What the Epson Photo 1390 service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson Photo 1390, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect 旨在重置兼容的计数器 Epson Photo 1390. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson Photo 1390
请按顺序完成这些步骤。直接 USB 连接以及原始 Epson 驱动程序对于实现可靠通信至关重要。.
-
安装原始驱动程序
Install the official Epson driver for Photo 1390 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson Photo 1390 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson Photo 1390.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson Photo 1390 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
Epson Photo 1390 reset FAQ
Does Epson Photo 1390 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
Can I reset Epson Photo 1390 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.