特定型号重置指南
Epson L100 Reset Waste Ink Counter
Epson L100 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Why the ink pad counter blocks Epson L100
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson L100 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect 旨在重置兼容的计数器 Epson L100. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson L100
先准备好电脑和连接。大多数尝试失败是由于缺少原始驱动程序、使用了间接 USB 连接，或其他 Epson 实用程序正在使用打印机。.
-
安装原始驱动程序
Install the official Epson driver for L100 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson L100 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L100.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson L100 is not detected
- Install the original Epson driver for L100; a generic Windows driver may not expose the required communication interface.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson L100 reset FAQ
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.