特定型号重置指南
Epson ET-2865 Reset Waste Ink Counter
If your Epson ET-2865 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why Epson ET-2865 stops printing
Waste ink produced by cleaning cycles is collected inside the printer. Epson ET-2865 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson ET-2865. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson ET-2865
先准备好电脑和连接。大多数尝试失败是由于缺少原始驱动程序、使用了间接 USB 连接，或其他 Epson 实用程序正在使用打印机。.
-
安装原始驱动程序
Install the official Epson driver for ET-2865 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson ET-2865 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2865.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson ET-2865 is not detected
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- Install the original Epson driver for ET-2865; a generic Windows driver may not expose the required communication interface.
Epson ET-2865 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Can I reset Epson ET-2865 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.