Epson EP-705A Waste Ink Counter Reset

When the Epson EP-705A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-705A uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson EP-705A Stops Printing (Waste Counter Limit)

通常不需要上门服务。. Wic Reset Connect allows a safe Epson EP-705A waste counter reset in minutes.

错误如何出现

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Reset Epson EP-705A Waste Ink Counter in 3 Steps

1. 步骤 1： Prepare a Windows PC + USB cable and connect Epson EP-705A directly. Keep Internet enabled for validation.
2. 步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson EP-705A appears in the device list.
3. 步骤 3： 粘贴重置密钥，点击 重置, and after completion power-cycle Epson EP-705A.

Most Epson EP-705A waste counter resets finish in ~1–2 minutes.

开始之前

• Windows 7/8/10/11 电脑
• 有效 Wic 复位连接复位键
• 需要 USB 连接（不支持 Wi-Fi 重置）
• 重置期间稳定的互联网连接