特定型号重置指南
Epson DX4050 Reset Waste Ink Counter
Epson DX4050 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
What the Epson DX4050 service message means
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson DX4050 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson DX4050. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson DX4050
按照以下步骤建立稳定的 USB 连接并清除废墨计数器。.
-
安装原始驱动程序
Install the official Epson driver for DX4050 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson DX4050 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson DX4050.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson DX4050 is not detected
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- Install the original Epson driver for DX4050; a generic Windows driver may not expose the required communication interface.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson DX4050 reset FAQ
Can I reset Epson DX4050 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.