特定型号重置指南

佳能 TS6050 墨水吸收器完全重置

When Canon TS6050 reports that the ink absorber is full, turning it off and on will not normally remove the lock. The printer must be prepared correctly and its counter reset.

重置键$8,00
即时通过电子邮件发送包含技术支持重置失败后更换密钥
问题

What stops Canon TS6050 from printing

The absorber pads collect ink generated during print-head cleaning. Canon TS6050 tracks those maintenance cycles in memory rather than measuring the pads directly.

Wic Reset Connect 旨在重置兼容的计数器 Canon TS6050. 。必要时仍应检查并维护实体废墨系统。.

Canon 所需

How to enter service mode on Canon TS6050

  1. 关闭打印机。.
  2. 按住 停止/重置.
  3. 在按住停止/复位的同时,按住 电源.
  4. 松开 Stop/Reset,但继续按住 Power。.
  5. 按下并松开 Stop/Reset 5次.
  6. 稍等片刻,然后松开 Power。电源指示灯应保持稳定亮起。.
5Stop/Reset 按压次数查看所有方法
Windows 7–11电脑或笔记本电脑
直接 USB 连接无 Wi-Fi 或集线器
互联网用于密钥验证
重置键用于此操作
分步操作

Reset the counter in Canon TS6050

The counter reset normally takes only a few minutes after Canon TS6050 has entered service mode successfully.

  1. 准备打印机

    解决其他错误,确认电源指示灯稳定亮起,然后使用上述顺序进入维修模式。.

  2. 通过 USB 直接连接

    Connect Canon TS6050 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.

  3. 启动 Wic Reset Connect

    以管理员身份运行程序,并等待检测到处于 Canon 维修模式的设备。.

  4. 输入密钥并重置

    输入购买的密钥,选择 Reset,并保持打印机连接,直到出现确认信息。.

正确完成: A successful reset is finalized with a normal restart of Canon TS6050. Confirm that the power light remains steady before printing.
If Canon TS6050 is not detected
  • Connect Canon TS6050 directly to the computer and try another data-capable USB cable or port.
  • 关闭 Canon 维护工具,并清除已暂停的打印作业,然后再打开 Wic Reset Connect。.
  • 以管理员身份运行 Wic Reset Connect,并保持互联网访问处于启用状态,以便验证密钥。.
  • 如果电源指示灯闪烁,请先解决显示的墨盒、纸张或机械错误,然后再尝试进入维修模式。.

打开完整说明

常见问题

Canon TS6050 reset FAQ

重置会清洁吸墨垫吗?

不会。它只会重置存储的计数器。当吸墨垫的实际状况需要维护时,请检查、清洁或更换吸墨垫。.

我可以通过 Wi-Fi 执行重置吗?

不可以。请在打印机与 Windows 计算机之间使用直接 USB 连接。.

应该按多少次停止/复位键?

For Canon TS6050, use 5 Stop/Reset presses in the sequence shown on this page.

放心重置

Restore Canon TS6050

Complete the Canon TS6050 absorber counter reset in a few carefully prepared steps.

重置密钥: $8,00
购物车
选择货币