Epson XP-434 Waste Ink Counter Reset
If your Epson XP-434 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-434 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Understanding the Epson XP-434 Waste Ink Counter
Một lần kiểm tra bảo dưỡng thường không cần thiết. Wic Reset Connect allows a safe Epson XP-434 waste counter reset in minutes.
Lỗi xuất hiện như thế nào
- Máy in từ chối in ngay cả khi còn mực.
- Epson Status Monitor hiển thị cảnh báo bảo trì.
- Đèn nhấp nháy và công việc bị chặn
- Thiết bị sẽ bị khóa cho đến khi thực hiện thao tác đặt lại.
Reset Epson XP-434 Waste Ink Counter in 3 Steps
- Bước 1: Prepare a Windows PC + USB cable and connect Epson XP-434 directly. Keep Internet enabled for validation.
- Bước 2: Bắt đầu Wic Reset Connect in Administrator mode and wait until Epson XP-434 appears in the device list.
- Bước 3: Use the key to reset the counter, wait for completion, then restart Epson XP-434 to finalize.
Most Epson XP-434 waste counter resets finish in ~1–2 minutes.
Câu hỏi thường gặp
Mất bao lâu?
Thường khoảng 1–2 phút.
Nếu việc đặt lại không hoạt động thì sao?
Kiểm tra cáp USB/cổng USB, chạy với quyền quản trị viên và đóng các công cụ in ấn khác.
Tôi có cần đến trung tâm dịch vụ không?
Thông thường không cần khóa bộ đếm mực thải; việc đặt lại thường là đủ.
Tôi có thể đặt lại qua Wi-Fi không?
Không. Việc đặt lại yêu cầu kết nối USB với máy tính Windows.
Guide prepared for Epson XP-434 – Waste Ink Counter Reset using Wic Reset Connect.