Fix Epson XP-434 Service Required – Waste Counter Reset

Epson XP-434 Waste Ink Counter Reset

If your Epson XP-434 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-434 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-434 Waste Ink Counter

通常不需要上门服务。. Wic Reset Connect allows a safe Epson XP-434 waste counter reset in minutes.

错误如何出现

打印机即使有墨水也拒绝打印
爱普生状态监视器显示维护警告
闪烁的灯光和受阻的工作
设备被锁定，直到执行重置

Reset Epson XP-434 Waste Ink Counter in 3 Steps

步骤 1： Prepare a Windows PC + USB cable and connect Epson XP-434 directly. Keep Internet enabled for validation.
步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson XP-434 appears in the device list.
步骤 3： Use the key to reset the counter, wait for completion, then restart Epson XP-434 to finalize.

购买重置密钥 ⬇️ 下载 Wic 重置连接说明

Most Epson XP-434 waste counter resets finish in ~1–2 minutes.

常见问题

需要多长时间？

通常约 1-2 分钟。.

如果重置不起作用怎么办？

检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.

我需要服务中心吗？

通常不用于废墨计数器锁；重置通常就足够了。.

可以通过 Wi-Fi 重置吗？

重置需要通过 USB 连接到 Windows PC。.

Guide prepared for Epson XP-434 – Waste Ink Counter Reset using Wic Reset Connect.