Model-specific reset guide
Đặt lại bộ đếm mực thải trên máy in Epson RX565
If your Epson RX565 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why Epson RX565 stops printing
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson RX565 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson RX565. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson RX565
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for RX565 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson RX565 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson RX565.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson RX565 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson RX565 reset FAQ
Does Epson RX565 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson RX565
Follow the verified sequence for Epson RX565, then restart the printer and continue your work.