Epson L1256 Waste Ink Counter Reset
The Epson L1256 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L1256 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson L1256 Ink Pad Counter Warning?
Most Epson L1256 waste ink counter locks are solved by a software counter reset. Wic Reset Connect cung cấp một quy trình đơn giản.
Step-by-Step: Epson L1256 Waste Counter Reset
- Bước 1: Prepare a Windows PC + USB cable and connect Epson L1256 directly. Keep Internet enabled for validation.
- Bước 2: Chạy Wic Reset Connect as Administrator and confirm Epson L1256 is detected.
- Bước 3: Dán khóa đặt lại, nhấp chuột Đặt lại, and after completion power-cycle Epson L1256.
Most Epson L1256 waste counter resets finish in ~1–2 minutes.
Trước khi bắt đầu
- Khóa đặt lại kết nối Wic hợp lệ
- Máy tính Windows 7/8/10/11
- Kết nối Internet ổn định trong quá trình reset
- Cần kết nối USB (không hỗ trợ đặt lại Wi-Fi)
Nếu máy in không được phát hiện
- Tạm thời vô hiệu hóa VPN/proxy nếu quá trình xác thực thất bại.
- Chạy ứng dụng với quyền quản trị viên.
- Sử dụng kết nối USB trực tiếp (tránh sử dụng hub).
- Đóng Epson Status Monitor hoặc các công cụ quản lý máy in khác.
- Hãy thử sử dụng một cáp USB khác (một số cáp chỉ hỗ trợ sạc).
Guide prepared for Epson L1256 – Waste Ink Counter Reset using Wic Reset Connect.