Fix Epson DX4050 Service Required – Waste Counter Reset

Epson DX4050 Waste Ink Counter Reset

The Epson DX4050 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson DX4050 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson DX4050 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson DX4050 waste counter reset in minutes.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson DX4050 Waste Ink Counter in 3 Steps

  1. Крок 1: Prepare a Windows PC + USB cable and connect Epson DX4050 directly. Keep Internet enabled for validation.
  2. Крок 2: Start Wic Reset Connect in Administrator mode and wait until Epson DX4050 appears in the device list.
  3. Крок 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson DX4050.
Buy Reset Key ⬇️ Download Wic Reset Connect Інструкції

Most Epson DX4050 waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson DX4050 – Waste Ink Counter Reset using Wic Reset Connect.

Кошик для покупок