Model-specific reset guide
Epson BX935FWD Reset Waste Ink Counter
A waste ink counter warning can prevent Epson BX935FWD from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Before resetting Epson BX935FWD
Waste ink produced by cleaning cycles is collected inside the printer. Epson BX935FWD tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson BX935FWD. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson BX935FWD
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for BX935FWD and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson BX935FWD to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson BX935FWD.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson BX935FWD is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for BX935FWD; a generic Windows driver may not expose the required communication interface.
Epson BX935FWD reset FAQ
Does Epson BX935FWD need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson BX935FWD over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson BX935FWD
Prepare Epson BX935FWD, purchase a reset key and return to printing without an unnecessary service visit.