特定型号重置指南
Epson BX935FWD Reset Waste Ink Counter
A waste ink counter warning can prevent Epson BX935FWD from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Before resetting Epson BX935FWD
Waste ink produced by cleaning cycles is collected inside the printer. Epson BX935FWD tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson BX935FWD. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson BX935FWD
请按顺序完成这些步骤。直接 USB 连接以及原始 Epson 驱动程序对于实现可靠通信至关重要。.
-
安装原始驱动程序
Install the official Epson driver for BX935FWD and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson BX935FWD to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson BX935FWD.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson BX935FWD is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- Install the original Epson driver for BX935FWD; a generic Windows driver may not expose the required communication interface.
Epson BX935FWD reset FAQ
Does Epson BX935FWD need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
Can I reset Epson BX935FWD over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.