Model-specific reset guide
Повне скидання поглинача чорнила Canon TR8010
An absorber warning on Canon TR8010 does not necessarily mean that the printer is mechanically damaged. The software counter and the physical pads must be considered separately.
What stops Canon TR8010 from printing
The lock is based on accumulated maintenance activity. Resetting Canon TR8010 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon TR8010. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TR8010
- Turn the printer off.
- Натисніть і утримуйте Зупинка/Сброс.
- Утримуючи кнопку Стоп/Сброс, натисніть і утримуйте Влада.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 разів.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TR8010
Prepare Canon TR8010 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TR8010 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TR8010 is not detected
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
Canon TR8010 reset FAQ
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Скільки разів потрібно натиснути Stop/Reset?
For Canon TR8010, use 5 Stop/Reset presses in the sequence shown on this page.
Does Canon TR8010 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Restore Canon TR8010
Complete the Canon TR8010 absorber counter reset in a few carefully prepared steps.