Model-specific reset guide
Canon MB5350 Ink Absorber Full Reset
If Canon MB5350 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
Understanding the Canon MB5350 ink absorber warning
Cleaning operations send unused ink into absorber pads inside the printer. Canon MB5350 estimates their usage with an electronic counter and can lock printing when that value reaches its limit.
Wic Reset Connect is designed to reset the compatible counter in Canon MB5350. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MB5350
- Turn the printer off.
- Натисніть і утримуйте Зупинка/Сброс.
- Утримуючи кнопку Стоп/Сброс, натисніть і утримуйте Влада.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 разів.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MB5350
Prepare Canon MB5350 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MB5350 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MB5350 is not detected
- Connect Canon MB5350 directly to the computer and try another data-capable USB cable or port.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
Canon MB5350 reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Скільки разів потрібно натиснути Stop/Reset?
For Canon MB5350, use 5 Stop/Reset presses in the sequence shown on this page.
Does Canon MB5350 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Restore Canon MB5350
Complete the Canon MB5350 absorber counter reset in a few carefully prepared steps.