特定型号重置指南
Canon MB5350 Ink Absorber Full Reset
If Canon MB5350 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
Understanding the Canon MB5350 ink absorber warning
Cleaning operations send unused ink into absorber pads inside the printer. Canon MB5350 estimates their usage with an electronic counter and can lock printing when that value reaches its limit.
Wic Reset Connect 旨在重置兼容的计数器 Canon MB5350. 。必要时仍应检查并维护实体废墨系统。.
How to enter service mode on Canon MB5350
- 关闭打印机。.
- 按住 停止/重置.
- 在按住停止/复位的同时，按住 电源.
- 松开 Stop/Reset，但继续按住 Power。.
- 按下并松开 Stop/Reset 5次.
- 稍等片刻，然后松开 Power。电源指示灯应保持稳定亮起。.
Reset the counter in Canon MB5350
Prepare Canon MB5350 before entering the key. A stable service-mode state and direct USB connection are essential.
-
准备打印机
解决其他错误，确认电源指示灯稳定亮起，然后使用上述顺序进入维修模式。.
-
通过 USB 直接连接
Connect Canon MB5350 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
启动 Wic Reset Connect
以管理员身份运行程序，并等待检测到处于 Canon 维修模式的设备。.
-
输入密钥并重置
输入购买的密钥，选择 Reset，并保持打印机连接，直到出现确认信息。.
If Canon MB5350 is not detected
- Connect Canon MB5350 directly to the computer and try another data-capable USB cable or port.
- 如果电源指示灯闪烁，请先解决显示的墨盒、纸张或机械错误，然后再尝试进入维修模式。.
- 关闭 Canon 维护工具，并清除已暂停的打印作业，然后再打开 Wic Reset Connect。.
- 以稳定的节奏重复按键顺序；过早松开电源键是维护模式失败的常见原因。.
Canon MB5350 reset FAQ
重置会清洁吸墨垫吗？
不会。它只会重置存储的计数器。当吸墨垫的实际状况需要维护时，请检查、清洁或更换吸墨垫。.
应该按多少次停止/复位键？
For Canon MB5350, use 5 Stop/Reset presses in the sequence shown on this page.
Does Canon MB5350 require service mode?
是。打印机必须先公开其维护接口，才能使用 Wic Reset Connect 重置计数器。.