Model-specific reset guide
Epson XP-441 Återställ bläckförbrukningsräknare
If your Epson XP-441 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
What the Epson XP-441 service message means
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson XP-441 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-441. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-441
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for XP-441 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-441 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-441.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-441 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for XP-441; a generic Windows driver may not expose the required communication interface.
Epson XP-441 reset FAQ
Can I reset Epson XP-441 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson XP-441
Prepare Epson XP-441, purchase a reset key and return to printing without an unnecessary service visit.