دليل إعادة الضبط الخاص بالطراز

إعادة ضبط عداد الحبر المتبقي لـ Epson XP-441

If your Epson XP-441 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

What the Epson XP-441 service message means

Every cleaning cycle sends a small amount of ink to the waste ink system. Epson XP-441 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson XP-441. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson XP-441

تستغرق إعادة الضبط عادةً بضع دقائق فقط، ولكن يجب اكتشاف الطابعة بشكل صحيح قبل استخدام المفتاح.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for XP-441 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson XP-441 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-441.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: After the program confirms completion, close it, turn Epson XP-441 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson XP-441 is not detected
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.
  • وصّل الطابعة مباشرةً بالكمبيوتر. لا تستخدم Wi-Fi أو موزّع USB أو محطة إرساء أو خادم طباعة.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.
  • Install the original Epson driver for XP-441; a generic Windows driver may not expose the required communication interface.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson XP-441 reset FAQ

Can I reset Epson XP-441 over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

ماذا لو فشلت محاولة إعادة الضبط الأولى؟

صحّح مشكلة برنامج التشغيل أو اتصال USB أولًا. إذا تم استهلاك المفتاح، فاستخدم مولّد المفتاح الجديد أو تواصل مع الدعم.

أعد الضبط بثقة

Restore Epson XP-441

Prepare Epson XP-441, purchase a reset key and return to printing without an unnecessary service visit.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك