Epson WorkForce 520 Waste Ink Counter Reset

The Epson WorkForce 520 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WorkForce 520 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson WorkForce 520 Waste Ink Counter

Most Epson WorkForce 520 waste ink counter locks are solved by a software counter reset. Wic Reset Connect ger en okomplicerad procedur.

Step-by-Step: Epson WorkForce 520 Waste Counter Reset

1. Steg 1: Prepare a Windows PC + USB cable and connect Epson WorkForce 520 directly. Keep Internet enabled for validation.
2. Steg 2: Kör Wic Reset Connect as Administrator and confirm Epson WorkForce 520 is detected.
3. Steg 3: Use the key to reset the counter, wait for completion, then restart Epson WorkForce 520 to finalize.

Most Epson WorkForce 520 waste counter resets finish in ~1–2 minutes.

Vad du behöver

• Windows 7/8/10/11 PC
• Giltig Wic Reset Anslut återställningsknapp
• Stabil internetanslutning under återställning
• USB-anslutning krävs (Wi-Fi-återställning stöds inte)

Om skrivaren inte identifieras

• Inaktivera VPN/proxy tillfälligt om valideringen misslyckas.
• Använd en direkt USB-anslutning (undvik hubbar).
• Prova en annan USB-kabel (vissa kablar är endast laddningsbara).
• Starta om skrivaren och datorn och försök sedan igen.
• Stäng Epson Status Monitor eller andra skrivarverktyg.