Epson SC-P400 Waste Ink Counter Reset

When the Epson SC-P400 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson SC-P400 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson SC-P400 Show ‘Service Required’?

Most Epson SC-P400 waste ink counter locks are solved by a software counter reset. Wic Reset Connect ger en okomplicerad procedur.

Hur felet uppträder

• ‘Service krävs’ / meddelande om livslängd i förare eller verktyg
• Kod för underhåll/support (varierar beroende på modell/förare)
• Utskriften stannar efter rengöringscykler
• Varningen upprepas efter omstart av skrivaren

Epson SC-P400 Ink Pad Counter Reset – Quick Steps

1. Steg 1: Prepare a Windows PC + USB cable and connect Epson SC-P400 directly. Keep Internet enabled for validation.
2. Steg 2: Kör Wic Reset Connect as Administrator and confirm Epson SC-P400 is detected.
3. Steg 3: Use the key to reset the counter, wait for completion, then restart Epson SC-P400 to finalize.

Most Epson SC-P400 waste counter resets finish in ~1–2 minutes.

Innan du börjar

• USB-anslutning krävs (Wi-Fi-återställning stöds inte)
• Stabil internetanslutning under återställning
• Giltig Wic Reset Anslut återställningsknapp
• Windows 7/8/10/11 PC