Epson SC-P400 Waste Ink Counter Reset

When the Epson SC-P400 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson SC-P400 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson SC-P400 Show ‘Service Required’?

Most Epson SC-P400 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.

错误如何出现

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Epson SC-P400 Ink Pad Counter Reset – Quick Steps

1. 步骤 1： Prepare a Windows PC + USB cable and connect Epson SC-P400 directly. Keep Internet enabled for validation.
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson SC-P400 is detected.
3. 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson SC-P400 to finalize.

Most Epson SC-P400 waste counter resets finish in ~1–2 minutes.

开始之前

• 需要 USB 连接（不支持 Wi-Fi 重置）
• 重置期间稳定的互联网连接
• 有效 Wic 复位连接复位键
• Windows 7/8/10/11 电脑