Model-specific reset guide
Epson NX100 Återställ bläckförbrukningsräknare
A waste ink counter warning can prevent Epson NX100 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why Epson NX100 stops printing
An ink pad message is a maintenance safeguard. It indicates that Epson NX100 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson NX100. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson NX100
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for NX100 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson NX100 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson NX100.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson NX100 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson NX100 reset FAQ
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson NX100
Ready to restore Epson NX100? Check the requirements once more and start the guided reset.