Epson ME-310 Waste Ink Counter Reset

If your Epson ME-310 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-310 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ME-310 Waste Ink Counter

Med Wic Reset Connect, you can reset the Epson ME-310 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson ME-310 Ink Pad Counter Reset – Quick Steps

1. Steg 1: Prepare a Windows PC + USB cable and connect Epson ME-310 directly. Keep Internet enabled for validation.
2. Steg 2: Öppna Wic Reset Connect with admin privileges and verify device recognition for Epson ME-310.
3. Steg 3: Klistra in återställningsnyckeln, klicka på Återställning, and after completion power-cycle Epson ME-310.

Most Epson ME-310 waste counter resets finish in ~1–2 minutes.

Systemkrav

• USB-anslutning krävs (Wi-Fi-återställning stöds inte)
• Windows 7/8/10/11 PC
• Giltig Wic Reset Anslut återställningsknapp
• Stabil internetanslutning under återställning

Vanliga korrigeringar

• Inaktivera VPN/proxy tillfälligt om valideringen misslyckas.
• Kör appen som administratör.
• Stäng Epson Status Monitor eller andra skrivarverktyg.
• Använd en direkt USB-anslutning (undvik hubbar).
• Prova en annan USB-kabel (vissa kablar är endast laddningsbara).