Fix Epson ET-1812 Service Required – Waste Counter Reset

Epson ET-1812 Waste Ink Counter Reset

The Epson ET-1812 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-1812 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ET-1812 Stops Printing (Waste Counter Limit)

Most Epson ET-1812 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Step-by-Step: Epson ET-1812 Waste Counter Reset

Steg 1: Prepare a Windows PC + USB cable and connect Epson ET-1812 directly. Keep Internet enabled for validation.
Steg 2: Run Wic Reset Connect as Administrator and confirm Epson ET-1812 is detected.
Steg 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-1812.

Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson ET-1812 waste counter resets finish in ~1–2 minutes.

Troubleshooting

Temporarily disable VPN/proxy if validation fails.
Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.
Restart printer and PC, then try again.
Try another USB cable (some cables are charge-only).

Frequently Asked Questions

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Guide prepared for Epson ET-1812 – Waste Ink Counter Reset using Wic Reset Connect.