Model-specific reset guide
Epson ET-1812 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson ET-1812 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Before resetting Epson ET-1812
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson ET-1812 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-1812. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-1812
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for ET-1812 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-1812 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-1812.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-1812 is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson ET-1812 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Can I reset Epson ET-1812 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson ET-1812
Use the model-specific steps above to reset Epson ET-1812 with a stable connection and a valid key.