Epson T20E Waste Ink Counter Reset

If your Epson T20E suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson T20E tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson T20E Ink Pad Counter Warning?

S spletno stranjo Wic Reset Connect, you can reset the Epson T20E waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson T20E Waste Ink Counter in 3 Steps

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson T20E via USB (Wi-Fi reset is not supported).
2. 2. korak: Odpri Wic Reset Connect with admin privileges and verify device recognition for Epson T20E.
3. 3. korak: Vnesite ključ za ponastavitev in pritisnite Ponastavitev. Wait ~1–2 minutes, then restart Epson T20E.

Most Epson T20E waste counter resets finish in ~1–2 minutes.

Preden začnete

• Windows 7/8/10/11 PC
• Stabilna internetna povezava med ponastavitvijo
• Veljavna ponastavitev Wic Povežite tipko za ponastavitev
• Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)