Epson T20E Waste Ink Counter Reset

If your Epson T20E suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson T20E tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson T20E Ink Pad Counter Warning?

Med Wic Reset Connect, you can reset the Epson T20E waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson T20E Waste Ink Counter in 3 Steps

1. Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson T20E via USB (Wi-Fi reset is not supported).
2. Trin 2: Åben Wic Reset Connect with admin privileges and verify device recognition for Epson T20E.
3. Trin 3: Indtast din nulstillingsnøgle, og tryk på Nulstil. Wait ~1–2 minutes, then restart Epson T20E.

Most Epson T20E waste counter resets finish in ~1–2 minutes.

Før du begynder

• Windows 7/8/10/11 PC
• Stabil internetforbindelse under nulstilling
• Gyldig Wic-nulstilling Tilslut nulstillingsnøgle
• USB-forbindelse påkrævet (Wi-Fi-nulstilling understøttes ikke)