Epson EW-M571T Waste Ink Counter Reset

Epson EW-M571T Waste Ink Counter Reset

If your Epson EW-M571T suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EW-M571T uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson EW-M571T Stops Printing (Waste Counter Limit)

Most Epson EW-M571T waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson EW-M571T Waste Ink Counter in 3 Steps

  1. 1. korak: Connect Epson EW-M571T to a Windows computer with a stable Internet connection using a USB cable.
  2. 2. korak: Start Wic Reset Connect in Administrator mode and wait until Epson EW-M571T appears in the device list.
  3. 3. korak: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson EW-M571T.
Buy Reset Key ⬇️ Download Wic Reset Connect Navodila

Most Epson EW-M571T waste counter resets finish in ~1–2 minutes.

System Requirements

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson EW-M571T – Waste Ink Counter Reset using Wic Reset Connect.

Nakupovalna košarica