Model-specific reset guide
Epson EW-M571T: azzeramento del contatore dell'inchiostro di scarto
When Epson EW-M571T reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Understanding the Epson EW-M571T waste ink warning
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson EW-M571T adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson EW-M571T. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson EW-M571T
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for EW-M571T and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson EW-M571T to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EW-M571T.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson EW-M571T is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Install the original Epson driver for EW-M571T; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson EW-M571T reset FAQ
Does Epson EW-M571T need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson EW-M571T
Complete the Epson EW-M571T counter reset with Wic Reset Connect and assistance whenever you need it.