Epson EW-M660FT Waste Ink Counter Reset

If your Epson EW-M660FT suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson EW-M660FT accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson EW-M660FT Waste Ink Counter

Most Epson EW-M660FT waste ink counter locks are solved by a software counter reset. Wic Reset Connect omogoča enostaven postopek.

Kako se pojavi napaka

• ‘Sporočilo ’Service Required" / življenjska doba v gonilniku ali pripomočku
• Koda za vzdrževanje/podporo (razlikuje se glede na model/voznik)
• Tiskanje se ustavi po ciklih čiščenja
• Opozorilo se ponovi po ponovnem zagonu tiskalnika

Step-by-Step: Epson EW-M660FT Waste Counter Reset

1. 1. korak: Connect Epson EW-M660FT to a Windows computer with a stable Internet connection using a USB cable.
2. 2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson EW-M660FT is detected.
3. 3. korak: Use the key to reset the counter, wait for completion, then restart Epson EW-M660FT to finalize.

Most Epson EW-M660FT waste counter resets finish in ~1–2 minutes.

Če tiskalnik ni zaznan

• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).
• Aplikacijo zaženite kot skrbnik.
• Uporabite neposredno povezavo USB (izogibajte se vozliščem).

POGOSTA VPRAŠANJA