特定型号重置指南
Epson EW-M571T Reset Waste Ink Counter
When Epson EW-M571T reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Understanding the Epson EW-M571T waste ink warning
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson EW-M571T adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson EW-M571T. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson EW-M571T
按照以下步骤建立稳定的 USB 连接并清除废墨计数器。.
-
安装原始驱动程序
Install the official Epson driver for EW-M571T and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson EW-M571T to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EW-M571T.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson EW-M571T is not detected
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- Install the original Epson driver for EW-M571T; a generic Windows driver may not expose the required communication interface.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
Epson EW-M571T reset FAQ
Does Epson EW-M571T need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.