Epson WF-2018 Waste Ink Counter Reset

When the Epson WF-2018 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2018 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson WF-2018 Show ‘Service Required’?

Most Epson WF-2018 waste ink counter locks are solved by a software counter reset. Wic Reset Connect poskytuje jednoduchý postup.

Ako sa chyba objaví

• ‘Hlásenie ’Požadovaná služba" / životnosť v ovládači alebo nástroji
• Kód údržby/podpory (líši sa podľa modelu/ovládača)
• Tlač sa po čistiacich cykloch zastaví
• Upozornenie sa opakuje po reštartovaní tlačiarne

Three Steps to Restore Epson WF-2018 Printing

1. Krok 1: Prepare a Windows PC + USB cable and connect Epson WF-2018 directly. Keep Internet enabled for validation.
2. Krok 2: Otvorte stránku Wic Reset Connect with admin privileges and verify device recognition for Epson WF-2018.
3. Krok 3: Zadajte svoj resetovací kľúč a stlačte Obnovenie. Wait ~1–2 minutes, then restart Epson WF-2018.

Most Epson WF-2018 waste counter resets finish in ~1–2 minutes.

Systémové požiadavky

• Platný kľúč na resetovanie Wic Connect
• Vyžaduje sa pripojenie USB (resetovanie Wi-Fi nie je podporované)
• Stabilné internetové pripojenie počas resetovania
• Windows 7/8/10/11 PC