How to Reset Epson T20 Waste Ink Counter

Epson T20 Waste Ink Counter Reset

The Epson T20 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson T20 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson T20 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson T20 waste counter reset in minutes.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson T20 Printing

  1. Krok 1: Connect Epson T20 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson T20 is detected.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson T20.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson T20 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Run the app as Administrator.
  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.
  • Temporarily disable VPN/proxy if validation fails.
  • Try another USB cable (some cables are charge-only).

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson T20 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík