Reset Epson R380 Waste Ink Counter in Minutes

Epson R380 Waste Ink Counter Reset

The Epson R380 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson R380 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson R380 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson R380 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson R380 Waste Counter Reset

  1. Krok 1: Connect Epson R380 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson R380 appears in the device list.
  3. Krok 3: Use the key to reset the counter, wait for completion, then restart Epson R380 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson R380 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson R380 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík