How to Reset Epson R2880 Waste Ink Counter

Epson R2880 Waste Ink Counter Reset

If your Epson R2880 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson R2880 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson R2880 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson R2880 waste counter reset in minutes.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson R2880 Printing

  1. Krok 1: Connect Epson R2880 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson R2880 appears in the device list.
  3. Krok 3: Use the key to reset the counter, wait for completion, then restart Epson R2880 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson R2880 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson R2880 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík