Reset Epson PX-A740 Waste Ink Counter in Minutes

Epson PX-A740 Waste Ink Counter Reset

The Epson PX-A740 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson PX-A740 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson PX-A740 Ink Pad Counter Warning?

Most Epson PX-A740 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson PX-A740 Waste Ink Counter in 3 Steps

  1. Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson PX-A740 via USB (Wi-Fi reset is not supported).
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson PX-A740 appears in the device list.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson PX-A740.
Buy Reset Key ⬇️ Download Wic Reset Connect Pokyny

Most Epson PX-A740 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson PX-A740 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupný košík