Model-specific reset guide
Vynulovanie počítadla odpadového atramentu v zariadení Epson ET-2873
When Epson ET-2873 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Why Epson ET-2873 stops printing
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson ET-2873 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-2873. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-2873
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for ET-2873 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-2873 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2873.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-2873 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for ET-2873; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
Epson ET-2873 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does Epson ET-2873 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson ET-2873
Use the model-specific steps above to reset Epson ET-2873 with a stable connection and a valid key.