Model-specific reset guide
Canon TR5070 Ink Absorber Full Reset
Canon TR5070 can stop printing when its internal ink absorber counter reaches a programmed threshold. Follow the model-specific preparation below before using Wic Reset Connect.
Understanding the Canon TR5070 ink absorber warning
Canon TR5070 uses a stored counter as a maintenance safeguard. Reaching the threshold can produce an Ink Absorber Full, Service Required or related support-code message.
Wic Reset Connect is designed to reset the compatible counter in Canon TR5070. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TR5070
- Turn the printer off.
- Stlačte a podržte tlačidlo Zastavenie/resetovanie.
- Počas držania tlačidla Stop/Reset stlačte a podržte Napájanie.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5-krát.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TR5070
Prepare Canon TR5070 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TR5070 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TR5070 is not detected
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Connect Canon TR5070 directly to the computer and try another data-capable USB cable or port.
Canon TR5070 reset FAQ
Koľkokrát mám stlačiť tlačidlo Stop/Reset?
For Canon TR5070, use 5 Stop/Reset presses in the sequence shown on this page.
Does Canon TR5070 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Restore Canon TR5070
Use the correct sequence for Canon TR5070 and restore printing without an unnecessary service visit.