Model-specific reset guide
Canon MG7500 Ink Absorber Full Reset
Canon MG7500 can stop printing when its internal ink absorber counter reaches a programmed threshold. Follow the model-specific preparation below before using Wic Reset Connect.
What the Canon MG7500 service message means
The lock is based on accumulated maintenance activity. Resetting Canon MG7500 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon MG7500. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MG7500
- Turn the printer off.
- Stlačte a podržte tlačidlo Zastavenie/resetovanie.
- Počas držania tlačidla Stop/Reset stlačte a podržte Napájanie.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 6-krát.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MG7500
Work through the sequence without rushing. Incorrect button timing or a blinking power light means the printer is not ready for the counter reset.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MG7500 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MG7500 is not detected
- Connect Canon MG7500 directly to the computer and try another data-capable USB cable or port.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
Canon MG7500 reset FAQ
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Koľkokrát mám stlačiť tlačidlo Stop/Reset?
For Canon MG7500, use 6 Stop/Reset presses in the sequence shown on this page.
Restore Canon MG7500
Prepare Canon MG7500, enter service mode and complete the reset with a valid Wic Reset Connect key.