Model-specific reset guide
Canon iP4910 Ink Absorber Full Reset
Canon iP4910 may block print jobs after recording enough cleaning and maintenance cycles. Use the sequence below to enter service mode and reset the stored value.
The waste ink counter inside Canon iP4910
The lock is based on accumulated maintenance activity. Resetting Canon iP4910 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon iP4910. The physical waste ink system should still be inspected and maintained when necessary.
Enter service mode on Canon iP4910
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon iP4910
Prepare Canon iP4910 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Connect directly by USB
Connect Canon iP4910 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon iP4910 is not detected
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Connect Canon iP4910 directly to the computer and try another data-capable USB cable or port.
Canon iP4910 reset FAQ
Koľkokrát mám stlačiť tlačidlo Stop/Reset?
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
Restore Canon iP4910
Wic Reset Connect combines a guided reset with support if Canon iP4910 does not respond as expected.