How to Reset Epson PX-435A Waste Ink Counter

Epson PX-435A Waste Ink Counter Reset

If your Epson PX-435A suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson PX-435A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson PX-435A Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson PX-435A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson PX-435A Waste Counter Reset

  1. Pasul 1: Use a Windows PC (7–11) with Internet access. Connect Epson PX-435A via USB (Wi-Fi reset is not supported).
  2. Pasul 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson PX-435A.
  3. Pasul 3: Paste the reset key, click Reset, and after completion power-cycle Epson PX-435A.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucţiuni

Most Epson PX-435A waste counter resets finish in ~1–2 minutes.

System Requirements

  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson PX-435A – Waste Ink Counter Reset using Wic Reset Connect.

Cărucior de cumpărături