Epson XP-355 Ink Pad Counter Reset Guide

Epson XP-355 Waste Ink Counter Reset

If your Epson XP-355 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-355 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-355 Stops Printing (Waste Counter Limit)

Most Epson XP-355 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Reset Epson XP-355 Waste Ink Counter in 3 Steps

Passo 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-355 via USB (Wi-Fi reset is not supported).
Passo 2: Run Wic Reset Connect as Administrator and confirm Epson XP-355 is detected.
Etapa 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-355.

Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson XP-355 waste counter resets finish in ~1–2 minutes.

Troubleshooting

Use a direct USB connection (avoid hubs).
Close Epson Status Monitor or other printer utilities.
Temporarily disable VPN/proxy if validation fails.
Run the app as Administrator.
Try another USB cable (some cables are charge-only).

Frequently Asked Questions

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-355 – Waste Ink Counter Reset using Wic Reset Connect.