Epson XP-355 Waste Ink Counter Reset

If your Epson XP-355 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-355 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-355 Stops Printing (Waste Counter Limit)

Most Epson XP-355 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Kako se pogreška prikazuje

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Reset Epson XP-355 Waste Ink Counter in 3 Steps

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-355 via USB (Wi-Fi reset is not supported).
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson XP-355 is detected.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson XP-355.

Most Epson XP-355 waste counter resets finish in ~1–2 minutes.

Otklanjanje poteškoća

• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Pokrenite aplikaciju kao administrator.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).

Često postavljana pitanja