Epson XP-315 Waste Ink Counter Reset

If your Epson XP-315 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson XP-315 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson XP-315 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson XP-315 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson XP-315 Ink Pad Counter Reset – Quick Steps

1. Passo 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-315 via USB (Wi-Fi reset is not supported).
2. Passo 2: Run Wic Reset Connect as Administrator and confirm Epson XP-315 is detected.
3. Etapa 3: Use the key to reset the counter, wait for completion, then restart Epson XP-315 to finalize.

Most Epson XP-315 waste counter resets finish in ~1–2 minutes.

System Requirements

• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key

Troubleshooting

• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.
• Close Epson Status Monitor or other printer utilities.
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.

FAQ