Model-specific reset guide
爱普生 XP-315 重置废墨计数器
Epson XP-315 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Why Epson XP-315 stops printing
An ink pad message is a maintenance safeguard. It indicates that Epson XP-315 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-315. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-315
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for XP-315 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-315 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-315.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-315 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for XP-315; a generic Windows driver may not expose the required communication interface.
Epson XP-315 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Can I reset Epson XP-315 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson XP-315 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson XP-315
A direct USB connection, the correct driver and a valid key are all you need to reset Epson XP-315.