Epson TX710W Ink Pad Counter Reset Guide

Epson TX710W Waste Ink Counter Reset

The Epson TX710W delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson TX710W tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson TX710W Stops Printing (Waste Counter Limit)

Most Epson TX710W waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Three Steps to Restore Epson TX710W Printing

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson TX710W directly. Keep Internet enabled for validation.
  2. Passo 2: Run Wic Reset Connect as Administrator and confirm Epson TX710W is detected.
  3. Etapa 3: Paste the reset key, click Reset, and after completion power-cycle Epson TX710W.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson TX710W waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson TX710W – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras