Model-specific reset guide
Epson TX710W Reset Waste Ink Counter
If your Epson TX710W has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Before resetting Epson TX710W
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson TX710W estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson TX710W. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson TX710W
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for TX710W and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson TX710W to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX710W.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson TX710W is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for TX710W; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson TX710W reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does Epson TX710W need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson TX710W
Complete the Epson TX710W counter reset with Wic Reset Connect and assistance whenever you need it.