Fix Epson TX300F Service Required – Waste Counter Reset

Epson TX300F Waste Ink Counter Reset

The Epson TX300F is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson TX300F accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson TX300F Waste Ink Counter

With Wic Reset Connect, you can reset the Epson TX300F waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson TX300F Ink Pad Counter Reset – Quick Steps

  1. Passo 1: Prepare a Windows PC + USB cable and connect Epson TX300F directly. Keep Internet enabled for validation.
  2. Passo 2: Start Wic Reset Connect in Administrator mode and wait until Epson TX300F appears in the device list.
  3. Etapa 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson TX300F.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson TX300F waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Try another USB cable (some cables are charge-only).
  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson TX300F – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras