特定型号重置指南
Epson TX300F Reset Waste Ink Counter
The service-required message on Epson TX300F often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Why Epson TX300F stops printing
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson TX300F adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson TX300F. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson TX300F
按照以下步骤建立稳定的 USB 连接并清除废墨计数器。.
-
安装原始驱动程序
Install the official Epson driver for TX300F and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson TX300F to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX300F.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson TX300F is not detected
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- Install the original Epson driver for TX300F; a generic Windows driver may not expose the required communication interface.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
Epson TX300F reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson TX300F need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
Can I reset Epson TX300F over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.